By clicking “Accept All Cookies”, you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Roof surfaces are the parts of the building envelope most exposed to solar radiation. With dark-colored roofing materials commonly used in our country, heat is quickly carried from the roof surface to the interior and creates discomfort by increasing temperatures. This situation also increases the energy consumption used for air conditioning purposes. Epikon Cool is designed to remove heat energy from the building by reflecting the solar radiation to the roofs at a high rate.
High reflectivity of solar radiation (67% reflectivity rate)
High heat release ability (86% heat release rate)
Turkey's first patented "Cool Roof" material
SRI Value: 80 (External laboratory tests were conducted according to ASTM C1519 and ASTM C1371 analyses.)
Protected against contamination
Technical Specifications Table
Measure of Success
Red Slate Lined Membrane
Epikon Cool Membrane
Solar Reflectance Rate
%8,6
%67
Heat Release Ratio
%82,5
%86
SRI (Sunlight Reflectance coefficient) (White reflective stone)
%2,9
%80,6
EPİKON COOL EP 400-5 MIN WHITE
EPİKON COOL EP 400-10 MIN WHITE
EPİKON COOL EP 400-20 MIN WHITE
EPİKON COOL EP 400-30 MIN WHITE
DEFINITION
Made of APP added modified bitumen, with high strength non-woven polyester felt carrier, -5°C cold bending value, lower surface covered with PE film, upper surface covered with UV resistant special white reflective mineral, 3.8 mm thick, 600/400 N /50 mm tensile strength
Made of APP added modified bitumen, with high strength non-woven polyester felt carrier, -10°C cold bending value, lower surface PE film coated, upper surface UV resistant special white reflective mineral coated, 3.8 mm thick, 800/600 N /50 mm tensile strength
Made of SBS added modified bitumen, with high strength non-woven polyester felt carrier, -20°C cold bending value, lower surface covered with PE film, upper surface covered with UV resistant special white reflective mineral, 3.8 mm thick, 800/600 N /50 mm tensile strength
Manufactured from high performance SBS modified bitumen, with strong non-woven polyester felt carrier, superior strength, -30°C cold bending value, PE film coated on the lower surface, UV resistant special white reflective mineral coated on the upper surface, 3.8 mm thick, 1000/800
N/50 mm tensile strength
N/50 mm tensile strength
N/50 mm tensile strength
N/50 mm tensile strength
PLACE OF USE
It is used as a final layer waterproofing membrane to ensure reflectivity on terraces and inclined concrete or light concrete roofs in temperate and cold climates, and as a single layer on all inclined roofs.
It is used as a final layer waterproofing membrane to ensure reflectivity on terraces and inclined concrete or light concrete roofs in temperate and cold climates, and as a single layer on all inclined roofs.
It is used as a final layer waterproofing membrane to ensure reflectivity on terraces and inclined concrete or light concrete roofs in temperate and cold climates, and as a single layer on all inclined roofs.
It is used as a final layer waterproofing membrane to ensure reflectivity on terraces and inclined concrete or light concrete roofs in temperate and cold climates, and as a single layer on all inclined roofs.
Search
