By clicking “Accept All Cookies”, you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
It is a ready-to-use butum solution that does not contain fillers. It creates a water-impermeable layer in the area where it is applied by evaporating the solvent it contains. It is used as the basic component of all polyurethane based materials (primer, single and double component waterproofing products).
The application surface must be clean and dry from dust, oil, construction waste and dirt. If the application surface is concrete, it must be cured. It is applied cold, does not require heating,
Epicon solvent-based bitumen solution is applied to the surface of the application surface in contact with water, and can be applied by spraying with a brush, roller or gun.
Epicon solvent-based bitumen solution dries in a short time of 1-2 hours for a single coat application. In cases where several coats will be applied, 24 hours should be waited between coats.
In double coat applications, the second coat should be applied in the opposite direction (left to right - top to bottom) compared to the first coat. After use, the unfinished tin should be kept closed and the brushes should be washed with solvent.
Search
Our products
