Epikon Stick-It

The membrane application is performed after the primer has completely dried. The required area is measured, and the membrane is cut into pieces before starting the application.
Epikon Stick-It, with its self-adhesive special formula, provides excellent adhesion on retaining walls, while its polyethylene coating, produced using Cross Lamine technology, ensures high resistance to tearing and puncturing.
With an additive-free, high-SBS content formula, it is a flexible and easy-to-apply solution suitable for all climates, offering a cold bending value of -20°C and providing an exceptionally high-quality and long-lasting waterproofing solution.
It is applied safely without a torch using flame-free application. The membrane has a thickness of 1.5 mm and comes in 20-meter roll lengths.
The application continues by cutting the membrane into pieces, and 10 cm overlap is applied along the long edge of the Epikon Stick-It. The application proceeds with alignment from the top based on the measured dimensions.
During the application, the membrane is rolled up to facilitate easy removal of the film. The film is slowly peeled off, completing the adhesion process.
At the end of the roll, a 15 cm overlap is applied at the short edge, ensuring the next piece overlaps on top.

EPİKON STICK-IT
Definition	Produced from self-adhesive, high-SBS-modified bitumen, it features a fiberglass carrier and has a cold bending value at -20°C. The top surface is coated with Crosslamine HDPE film, while the bottom surface is covered with a self-adhesive, removable silicone film. The membrane has a thickness of 1.5 mm.
Application Areas	It is used as a single-layer self-adhesive waterproofing membrane on building retaining walls.
Thickness	1,5 mm
Dimensions	1 m x 20 m
Pallet Meterage	500 m2