By clicking “Accept All Cookies”, you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
ODE Granat Aluminum Foil Membrane is a flexible waterproofing solution produced from APP-added modified bitumen, with a polyester felt carrier, its upper surface covered with aluminum foil for special applications, and suitable for application in cold and temperate climates.
ODE Bitumen Emulsion
It is used to prepare the surface for ODE Membrane adhesion in applications on curtain walls, foundations and terrace roofs.
APPLICATION
It is applied cold and penetrates concrete surfaces. It can be applied with a bristle brush or roller after mixing it with approximately 20% water. It dries in approximately 4-5 hours depending on weather conditions. It should not be applied in rainy weather and at temperatures below +5 ͦC. The next layer should not be applied until one layer is completely dry.
It is used as a final layer membrane in roof waterproofing, chimney bottoms and roof gutters.
Its upper surface is covered with aluminum foil and is UV resistant.
It adapts to all details with its flexibility.
Long aging process provided by APP additives and reflective properties
Technical Specifications Table
DEFINITION
Made of modified bitumen with APP, non-woven polyester felt carrier, -10°C cold bending value, upper surface covered with UV resistant aluminum foil, lower surface covered with PE film, 3 mm thick, 800/600 N/50 mm tensile strength
PLACE OF USE
It is used as a second layer membrane in roof waterproofing, chimney bottoms and roof gutters.
THICKNESS
3 mm
DIMENSIONS
1 m x 10 m
PALLET QUANTITY
300 m²
Application Areas
Facade, Terrace, Roof Insulation
Foundation Insulation
Application Steps
ODE Bitumen Emulsion Primer is applied to the surface in accordance with the recipe. Before starting the membrane application, the primer should be allowed to dry for 1 day at 15-20 0C, or 2 days in colder weather. Application should not be made at temperatures below +5 0C and in rainy weather.
ODE RUBİN waterproofing membrane is applied from the lowest level by opening it perpendicular to the slope on terraces or sloping roofs. The membrane is overlapped lengthwise by 15 cm and widthwise by 10 cm. It is glued with a torch flame, as suggested in detail, only at the joints or by the full bonding method. It is applied with mechanical fixation on surfaces that do not allow torch application or in cases where precautions must be taken against wind load. After the first layer of covers is applied to the entire surface, staggering the transverse joints, the second layer of covers should be applied staggered to center the transverse and longitudinal joints of the first layer.
Search
