By clicking “Accept All Cookies”, you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Proof membrane systems are new generation SBS-based waterproofing materials used in the insulation of foundations and single-face curtains, applied before concrete and able to provide complete and permanent adhesion to the structural concrete poured on it.
It is a new generation waterproofing system with high adhesion strength to fresh concrete, which can be used safely in foundation and single-face formwork curtain waterproofing applications.
In foundation waterproofing; Reinforcement works can be carried out and foundation concrete can be laid directly on the ODE Proof Water Insulation System, without placing the protection concrete.
Thanks to its recipe and the special sand structure on its upper surface, it has high adhesion strength to the concrete to be poured on it.
It is resistant to hydrostatic water pressure.
It is resistant to tearing and puncture.
It saves time and labor.
ODE Proof Waterproofing System has a wide product range for all kinds of details.ODE Proof Vertical 3.0 mm Self-Adhesive Bituminous Membrane
ODE Proof Horizontal 3.5 mm Bituminous Membrane
ODE Proof Horizontal 4.5 mm Bituminous Membrane
ODE Proof Horizontal Double 4.5 mm Double Carrier Bituminous Membrane
Technical Specifications Table
PRODUCT
Carrier Type
Thickness (mm)
Bending in Cold (0C)
Tensile strength (N/50 mm)
Impact Resistance(mm)
Tear Strength (N)
Elongation at Break (%)
Resistance to Static Loads(kg)
ODE PROOF 300 VERTICAL (300 m²/plt)
Polyester
3,0 mm
-20
800/600
750
200/200
40/40
5
ODE PROOF 350 HORIZONTAL (230 m²/plt)
Polyester
3,50 mm
-20
800/600
750
200/200
40/40
10
ODE PROOF 450 HORIZONTAL (160 m²/plt)
Polyester
4,50 mm
-20
800/800
1000
200/200
40/40
15
ODE PROOF 450 DOUBLE (160 m²/plt)
Çift Polyester
4,50 mm
-20
1000/800
1000
300/300
40/40
20
Application Areas
Facade, Terrace, Roof Insulation
Foundation Insulation
Application Steps
ODE Bitumen Emulsion Primer is applied to the surface in accordance with the recipe. Before starting the membrane application, the primer should be allowed to dry for 1 day at 15-20 0C, or 2 days in colder weather. Application should not be made at temperatures below +5 0C and in rainy weather.
ODE RUBİN waterproofing membrane is applied from the lowest level by opening it perpendicular to the slope on terraces or sloping roofs. The membrane is overlapped lengthwise by 15 cm and widthwise by 10 cm. It is glued with a torch flame, as suggested in detail, only at the joints or by the full bonding method. It is applied with mechanical fixation on surfaces that do not allow torch application or in cases where precautions must be taken against wind load. After the first layer of covers is applied to the entire surface, staggering the transverse joints, the second layer of covers should be applied staggered to center the transverse and longitudinal joints of the first layer.
Search
