By clicking “Accept All Cookies”, you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
It is a sheet-shaped, closed-pore, flexible elastomeric rubber foam used for thermal insulation and protection against condensation in heating, cooling and air conditioning systems.
Water vapor diffusion resistance coefficient is µ≥7,000.
Provides ideal solutions in heating, cooling installations and ventilation systems.
Provides maximum savings with its low thermal conductivity coefficient.
Increases energy efficiency.
Water vapor diffusion resistance coefficient is µ≥7,000.
Protects the installation against condensation.
It has closed pores and protects the system against corrosion under insulation (CUI).
It is not affected by mold and microorganisms and has antimicrobial properties.
It can be produced in various thicknesses and widths.
Ideal for insulation of large diameter pipes, rectangular and circular cross-section ventilation ducts.
It can be produced in the thickness range of 6-60 mm.
It is flexible and easy to apply.
Extends the working life of the installation.
EPD Certificate (Environmental Product Declaration) provides 2-18 additional points for projects with green building certification systems such as LEED, BREEAM, DGNB.
Technical Specifications Table
Product Name
λ (Thermal Conductivity Coefficient) W/(m.K)
μ (Water Vapor Diffusion Resistance Coefficient)
Fire Class (EN 13501-1)
R-Flex PRM Sheet
0.032(-20ºC)
0.034(0ºC)
0.036(+20ºC)
7000
B-s3-d0
Width
Thickness (mm)
6
9
10
13
19
25
32
40
50
60
1000
√
√
√
√
√
√
√
√
√
√
1200
√
√
√
√
√
√
√
√
√
-
1500
-
√
√
√
√
√
√
-
-
-
ODE R–FLEX BANDS
ODE R-FLEX provides full sealing with Reinforced Rubber Tapes. Economical installation is made with ODE R-FLEX, PVC Tapes.
ODE KONFiX (ODE R-FLEX ADHESIVE)
It is a synthetic rubber based, super strong adhesive used in ODE R-Flex applications. It prevents convection current at the joints and ensures easy and fast installation. The surfaces to be bonded should not be oily or dusty. ODE Konfix should be applied equally to both surfaces with a roller, brush or spraying method, and bonding should be ensured under constant pressure. Drying time varies between 10 seconds and 4 minutes, and the time required for full adhesion is 24 hours.
Product
Quantity (kg)
ODE KONFİX
14
ODE KONFİX
3
Coated Products Advantege Table
COATED PRODUCTS:
ODE R-Flex PRM Sheet is also produced as self-coated with different laminations.
· ODE R-Flex PRM AL-CLAD Sheet (Aluminum Coating)
· ODE R-Flex PRM CLASS 0 ALU FOIL Sheet (Fireproof Aluminum Foil)
· ODE R-Flex PRM ALU Sheet (Aluminum foil covered)
· ODE R-Flex PRM SA Sheet (Self adhesive)
· ODE R-Flex PRM ALU SA Sheet (Self adhesive and covered with aluminum foil)
COATING TYPES
CLASS 0 ALU FOIL
AL-CLAD
ALU
SA
ALU SA
Definition
Fireproof Aluminum Foil
Aluminum Coating
Aluminium foil
Self Adhesive
Self-adhesive and aluminum foil coated
Product Type (Board)
√
√
√
√
√
Increases the value of µ
√
√
√
X
√
High R value
√
√
√
√
√
Ease of Application
√
√
√
√
√
Visual Supports the Channel
√
√
√
X
√
Application Areas
Installation Insulation
Application
INSULATION OF AIR CONDITIONING DUCTS
Carefully clean the surface to be insulated. There should be nothing left on the surface to prevent adhesion. Measure the surface of the duct to be insulated and cut ODE R-Flex Sheet from the roll in appropriate dimensions.
Apply ODE R-Flex Adhesive to the surface of the ODE R-Flex Sheet to be adhered and to the channel. To get good results, coat the bottom surface of the channel first, then the side surfaces and finally the top surface.
Secure the edges together with ODE R-Flex Adhesive.
INSULATION OF TANKS
Before insulating, carefully clean the entire surface. Measure the height of the tank and its perimeter with the ODE R-Flex Sheet.
Cut the measurements by transferring them to an ODE R-Flex Sheet. Apply ODE R-Flex Adhesive to the entire surface of the ODE R-Flex Sheet with a spatula, and to the surface of the tank with a brush. Apply glue to the edges of the plate and glue the plate to the tank. Pin the edges together.
To insulate the curved part, measure it with ODE R-Flex Sheet.
By calculating the radius, draw the circle that will cover the curved part. Carefully cut the circle from the marked places.
Apply ODE R-Flex Adhesive to the piece you cut and the curved surface of the tank to be coated.
Glue the piece in place and press down to prevent it from sliding from the center to the outside.
Once the part is adhered, apply ODE R-Flex Adhesive all around the edges. After drying, press firmly and attach it with the ODE R-Flex Sheet on the body.
Search
